ALEKO Arctica Inflatable Cold Plunge & 1 HP Chiller/Heater Kit

Premium Single-Person High-Density Drop-Stitch Portable Tub, 1 HP Smart Thermo-Regulated Chiller/Heater Unit, Built-In Filtration, and Wi-Fi App Integration

Get a complete, automated cold plunge setup anywhere with the ALEKO Arctica Inflatable Cold Plunge & 1 HP Chiller/Heater Kit. Engineered to combine the structural rigidity of a hard-sided tub with the mobility of an inflatable design, this premium setup fits home gyms, patios, and mobile setups alike. There's no need to purchase and haul ice — the system is fully automated and ready to establish a pristine, temperature-regulated plunge pool at a moment's notice.

The tub's walls are constructed with high-density, military-grade drop-stitch PVC material that inflates to a rock-solid, rigid surface that easily supports sitting weight without flexing or bowing. Paired with the smart-integrated 1 HP Chiller and Heater machine, the water can be chilled down to 37°F (3°C) or heated up to 104°F (40°C) for warm soaks. With a built-in circulating pump, an active particulate filter, an integrated ozone sanitation generator, and smart Wi-Fi mobile controls, this plug-and-play system offers unmatched utility and ease of use.

Key Product Features & Core Engineering

• Rigid Drop-Stitch Construction: Inflates to a rock-solid state using premium double-wall drop-stitch technology, providing excellent thermal insulation and structural durability.
• 1 HP Temperature Chiller & Heater: A heavy-duty, commercial-grade 1 HP compressor rapidly chills the water down to 37°F (3°C) or warms it up to 104°F (40°C).
• Ozone & Multi-Stage Sanitation: An integrated filtration pump, physical particulate filter, and built-in corona-discharge ozone generator keep water clean and clear with minimal chemicals.
• Smart Wi-Fi Smartphone Integration: Monitor water temperatures, set heating or cooling schedules, and control power settings directly through the mobile app.
• Incredible Portable Convenience: The inflatable tub deflates in minutes and packs down into an included heavy-duty carry bag for travel or storage.
• Insulated Buckle-Down Lid: A matching inflatable insulated thermal cover clips securely to the tub's sides to block dirt, wind, and ambient heat.

Technical Specifications Summary

Comprehensive Product Packaging List

• 1 × ALEKO Arctica Inflatable Drop-Stitch Cold Plunge Tub
• 1 × 1 HP Smart Chiller & Heater Unit (With Built-In Pump, Filter, and Wheels)
• 1 × Inflatable Clip-Locking Thermal Cover Lid
• 2 × High-Pressure Connection Hoses with Double-O-Ring Quick Connectors
• 1 × Heavy-Duty Double-Action Manual Hand Inflation Pump
• 1 × Professional Storage & Travel Backpack Carry Bag
• 1 × Master Hardware Setup Pack, Extra Filter Cartridges, and User Manual

Critical Field Installation & Operational Guidelines

• Flat, Debris-Free Placement: Always place the inflatable tub on a completely flat, level surface with the footprint clear of sharp rocks, twigs, or debris. A high-density protective ground mat under the tub adds puncture protection and thermal insulation.
• Chiller Exhaust Clearances: Position the 1 HP chiller on a flat, dry, level surface near the tub and leave at least 12 to 18 inches of clear, unobstructed space around the exhaust vents so the compressor can breathe.
• Proper Inflation Settings: Use the included dual-action manual pump to inflate the tub's drop-stitch walls to 8 to 10 PSI. Do not over-inflate past 12 PSI, as solar exposure on hot days can raise internal air pressure.
• Winter Freezing Safeguards: In freezing climates, keep the chiller's circulating pump running or set the heater to a low temperature to keep water moving through the hoses. If powering off for winter, drain all water completely from the tub, pump, hoses, and chiller.

Disclaimer: This product is intended for general wellness, fitness, recovery, relaxation, or home use. It is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease. Individual experiences may vary.